Sequential linear() Animation With N Elements

by: Temani Afif
Wed, 15 Oct 2025 13:39:39 +0000

Let’s suppose you have N elements with the same animation that should animate sequentially. The first one, then the second one, and so on until we reach the last one, then we loop back to the beginning. I am sure you know what I am talking about, and you also know that it’s tricky to get such an effect. You need to define complex keyframes, calculate delays, make it work for a specific number of items, etc.

Tell you what: with modern CSS, we can easily achieve this using a few lines of code, and it works for any number of items!

The following demo is currently limited to Chrome and Edge, but will work in other browsers as the sibling-index() and sibling-count() functions gain broader support. You can track Firefox support in Ticket #1953973 and WebKit’s position in Issue #471.

In the above demo, the elements are animated sequentially and the keyframes are as simple as a single to frame changing an element’s background color and scale:

@keyframes x {
  to {
    background: #F8CA00;
    scale: .8;
  }
}

You can add or remove as many items as you want and everything will keep running smoothly. Cool, right? That effect is made possible with this strange and complex-looking code:

.container > * {
  --_s: calc(100%*(sibling-index() - 1)/sibling-count());
  --_e: calc(100%*(sibling-index())/sibling-count());

  animation: 
    x calc(var(--d)*sibling-count()) infinite 
    linear(0, 0 var(--_s), 1, 0 var(--_e), 0);
}

It’s a bit scary and unreadable, but I will dissect it with you to understand the logic behind it.

The CSS linear() function

When working with animations, we can define timing functions (also called easing functions). We can use predefined keyword values — such as linear, ease, ease-in, etc. — or steps() to define discrete animations. There’s also cubic-bezier().

But we have a newer, more powerful function we can add to that list: linear().

From the specification:

A linear easing function is an easing function that interpolates linearly between its control points. Each control point is a pair of numbers, associating an input progress value to an output progress value.

animation-timing-function: linear creates a linear interpolation between two points — the start and end of the animation — while the linear() function allows us to define as many points as we want and have a “linear” interpolation between two consecutive points.

It’s a bit confusing at first glance, but once we start working with it, things becomes clearer. Let’s start with the first value, which is nothing but an equivalent of the linear value.

linear(0 0%, 1 100%)

We have two points, and each point is defined with two values (the “output” progress and “input” progress). The “output” progress is the animation (i.e., what is defined within the keyframes) and the “input” progress is the time.

Let’s consider the following code:

.box {
  animation: move 2s linear(0 0%, 1 100%);
}

@keyframes move {
  0%   {translate: 0px }
  100% {translate: 80px}
}

In this case, we want 0 of the animation (translate: 0px) at t=0% (in other words, 0% of 2s, so 0s) and 1 of the animation (translate: 80px) at t=100% (which is 100% of 2s, so 2s). Between these points, we do a linear interpolation.

Instead of percentages, we can use numbers, which means that the following is also valid:

linear(0 0, 1 1)

But I recommend you stick to the percentage notation to avoid getting confused with the first value which is a number as well. The 0% and 100% are implicit, so we can remove them and simply use the following:

linear(0, 1)

Let’s add a third point:

linear(0, 1, 0)

As you can see, I am not defining any “input” progress (the percentage values that represent the time) because they are not mandatory; however, introducing them is the first thing to do to understand what the function is doing.

The first value is always at 0% and the last value is always at 100%.

linear(0 0%, 1, 0 100%)

The value will be 50% for the middle point. When a control point is missing its “input” progress, we take the mid-value between two adjacent points. If you are familiar with gradients, you will notice the same logic applies to color stops.

linear(0 0%, 1 50%, 0 100%)

Easier to read, right? Can you explain what it does? Take a few minutes to think about it before continuing.

Got it? I am sure you did!

It breaks down like this:

1. We start with translate: 0px at t=0s (0% of 2s).
2. Then we move to translate: 80px at t=1s (50% of 2s).
3. Then we get back to translate: 0px at t=2s (100% of 2s).

Most of the timing functions allow us to only move forward, but with linear() we can move in both directions as many times as we want. That’s what makes this function so powerful. With a “simple” keyframes you can have a “complex” animation.

I could have used the following keyframes to do the same thing:

@keyframes move {
  0%, 100% { translate: 0px }
  50% { translate: 80px }
}

However, I won’t be able to update the percentage values on the fly if I want a different animation. There is no way to control keyframes using CSS so I need to define new keyframes each time I need a new animation. But with linear(), I only need one keyframes.

In the demo below, all the elements are using the same keyframes and yet have completely different animations!

Add a delay with linear()

Now that we know more about linear(), let’s move to the main trick of our effect. Don’t forget that the idea is to create a sequential animation with a certain number (N) of elements. Each element needs to animate, then “wait” until all the others are done with their animation to start again. That waiting time can be seen as a delay.

The intuitive way to do this is the following:

@keyframes move {
  0%, 50% { translate: 0px }
  100% { translate: 80px }
}

We specify the same value at 0% and 50%; hence nothing will happen between 0% and 50%. We have our delay, but as I said previously, we won’t be able to control those percentages using CSS. Instead, we can express the same thing using linear():

linear(0 0%, 0 50%, 1 100%)

The first two control points have the same “output” progress. The first one is at 0% of the time, and the second one at 50% of the time, so nothing will “visually” happen in the first half of the animation. We created a delay without having to update the keyframes!

@keyframes move {
  0% { translate: 0px }
  100% { translate: 80px }
}

Let’s add another point to get back to the initial state:

linear(0 0%, 0 50%, 1 75%, 0 100%)

Or simply:

linear(0, 0 50%, 1, 0)

Cool, right? We’re able to create a complex animation with a simple set of keyframes. Not only that, but we can easily adjust the configuration by tweaking the linear() function. This is what we will do for each element to get our sequential animation!

The full animation

Let’s get back to our first animation and use the previous linear() value we did before. We will start with two elements.

Nothing surprising yet. Both elements have the exact same animation, so they animate the same way at the same time. Now, let’s update the linear() function for the first element to have the opposite effect: an animation in the first half, then a delay in the second half.

linear(0, 1, 0 50%, 0)

This literally inverts the previous value:

Tada! We have established a sequential animation with two elements! Are you starting to see the idea? The goal is to do the same with any number (N) of elements. Of course, we are not going to assign a different linear() value for each element — we will do it programmatically.

First, let’s draw a figure to understand what we did for two elements.

When one element is waiting, the other one is animating. We can identify two ranges. Let’s imagine the same with three elements.

This time, we need three ranges. Each element animates in one range and waits in two ranges. Do you see the pattern? For N elements, we need N ranges, and the linear() function will have the following syntax:

linear(0, 0 S, 1, 0 E, 0)

The start and the end are equal to 0, which is the initial state of the animation, then we have an animation between S and E. An element will wait from 0% to S, animate from S to E, then wait again from E to 100%. The animation time equals to 100%/N, which means E - S = 100%/N.

The first element starts its animation at the first range (0 * 100%/N), the second element at the second range (1 * 100%/N), the third element at the third range (2 * 100%/N), and so on. S is equal to:

S = (i - 1) * 100%/N

…where i is the index of the element.

Now, you may ask, how do we get the value of N and i? The answer is as simple as using the sibling-count()and sibling-index() functions! Again, these are currently supported in Chromium browsers, but we can expect them to roll out in other browsers down the road.

S = calc(100%*(sibling-index() - 1)/sibling-count())

And:

E = S + 100%/N
E = calc(100%*sibling-index()/sibling-count())

We write all this with some good CSS and we are done!

.box {
  --d: .5s; /* animation duration */
  --_s: calc(100%*(sibling-index() - 1)/sibling-count());
  --_e: calc(100%*(sibling-index())/sibling-count());

  animation: x calc(var(--d)*sibling-count()) infinite linear(0, 0 var(--_s), 1, 0 var(--_e), 0);
}
@keyframes x {
  to {
    background: #F8CA00;
    scale: .8;
  }
}

I used a variable (--d) to control the duration, but it’s not mandatory. I wanted to be able to control the amount of time each element takes to animate. That’s why I multiply it later by N.

Now all that’s left is to define your animation. Add as many elements as you want, and watch the result. No more complex keyframes and magic values!

Note: For unknown reasons (probably a bug) you need to register the variables with @property.

More variations

We can extend the basic idea to create more variations. For example, instead of having to wait for an element to completely end its animation, the next one can already start its own.

This time, I am defining N + 1 ranges, and each element animates in two ranges. The first element will animate in the first and second range, while the second element will animate in the second and third range; hence an overlap of both animations in the second range, etc.

I will not spend too much time explaining this case because it’s one example among many we create, so I let you dissect the code as a small exercise. And here is another one for you to study as well.

Conclusion

The linear() function was mainly introduced to create complex easing such as bounce and elastic, but combined with other modern features, it unlocks a lot of possibilities. Through this article, we got a small overview of its potential. I said “small” because we can go further and create even more complex animations, so stay tuned for more articles to come!

---

Sequential linear() Animation With N Elements originally published on CSS-Tricks, which is part of the DigitalOcean family. You should get the newsletter.